Step 4 Firmly tighten the bar weight retaining screw to secure the entire assembly with the R&G slider piece on top of the Kaoko bar-end weight face (Refer to picture 5). Note to keep the 2mm gap …

Items Included in your kit Kaoko bar-end weight • Friction Nut • Thrust Washer • 2mm Allen Key Fitting Instructions

KAOKO ACCESSORIES AND PRODUCTS Express Disclaimer, Exclusion of Liability, Indemnity and Safety Warning:

The KAOKO™ Throtle Stabilizer is an atermarket accessory. Any misunderstood, abused or incorrectly installed motorcycle accessory is a safety hazard that could cause injury or death. It’s the rider’s …

Maintenance: Remove kit annually. Unscrew Friction Nut and brush clean threads with a mild soap. Apply petroleum jelly to threads and assemble. Adjust grub screw to desired operating resistance. (O …

Step 4 Adjust the friction nut up against the shoulder of the Kaoko end weight. The nut must seat up to the rubber O-ring on the end weight. Place the Barkbuster hand guard bracket against the Kaoko bar …

Items Included in your kit Kaoko bar-end weight • Friction Nut • Thrust Washer/s • 2mm Allen Key Fitting Instructions 1 Hand Guard bracket Handlebar Tube

Step 2 picture 2 It may be necessary to slightly fold the lip of the grip to expose the throttle sleeve. Note: To enable improved functionality, it is recommended (not essential) to apply very light smear of …

Step 5 Place the hand guard and hand guard spacer onto the end of the OEM bar-end weight and secure the entire assembly by inserting and tightening the M6x65 CSK screw provided in the …

(O-Ring cushion: 19.6mm I.D. x 2.4mm section — if replacement is required)